Amprobe DM-111S Current-Data-Logger - Manual (Page 48)

DMIIIS
EN - 46
12. MAINTENANCE
12.1. GENERAL
The DM-
IIIS is a precision instrument. For its’ use and storage, follow the
recommendations and instructions contained in this manual in order to avoid possible
damages or dangers.
Never use the instrument in environments with a high humidity or temperature.
Do not expose the instrument to direct sunlight.
Always turn off the instrument after use.
12.2. BATTERY REPLACEMENT
When the battery indicator on the display appears almost empty ( ) the batteries must
be replaced.
CAUTION
Only qualified technicians should operate the instrument. Before replacing
the batteries disconnect the test leads from circuit under voltage in order to
avoid electrical shocks.
1. Disconnect cables and clamps from the circuit under test.
2. Turn the instrument off by pressing ON/OFF.
3. Remove the cables from the input terminals.
4. Unscrew the screw of the battery cover and remove the cover.
5. Replace the batteries with 6 new 1.5 V - AA.
6. Reposition the cover and fasten it with the proper screw.
12.3. CLEANING
Use a soft dry cloth to clean the instrument. Do not use wet clothes, solvents, water and so
on.