Amprobe ACD-330T Clamp-On-Multimeter - Manual (Page 8)

WARNING
Read “SAFETYINFORMATION” before using the meter.
NOTE
Some typical tests are provided in this manual. These tests are designed to help you under-
stand how to use the Meter. Consult original manufacturer service manual for the test pro-
cedures that apply to your particular piece of equipment.
Your Clamp-on multimeter is a hand-held, battery-operated instrument for testing and
troubleshooting electrical and electronic systems. If the meter is damaged or something is
missing, contact the place of purchase immediately.
A WARNING identifies conditions and actions that pose hazard(s) to the user; a CAU-
TION identifies conditions and actions that may damage the Meter. International electri -
cal symbols used are explained in Table 1.
AC ~ Alternating Current
DC ~ Direct Current
AC and DC ~ Alternating and Direct Current
Ground
Double Insulation
See Explanation in the Manual
USING THE METER SAFELY
T able 1. International Electrical Symbols
FRENCH WARNING
This meter has a warning on the bottom chassis case that needs to be followed prior to opening
the case. We have transfered this to French translation as listed below:
ATTENTION
POUR EVITER UN CHOC ELECTRIQUE,
ENLECER LES CORDONS D’ESSAI AVANT
D’OUVRIR LE BOITIER.
NE BAS UTILISER LORSQUE LE BOITIER
ESTOUVERT
4