Amprobe ACD-50NAV ACD-51NAV ACDC-52NAV ACD-53NAV ACD-54NAV Navigator-Clamps - Manual (Page 14)

8
In PEAK HOLD mode, the meter is activated to save the positive peak value
and negative peak value. Positive peak value is displayed in PEAK MAX
mode. Negative peak value is displayed in PEAK MIN mode.
Inrush Current : (AC mode only)
If the under testing inrush current could be bigger than 100A ac, please
select the range to 600A/1000A in advance before activating inrush current.
In ACA mode, select “ ” indicator on the display to enter Inrush Current
mode. To exit Inrush Current mode, press the navigator key again.
ENTER
Loading
Inrush current reading