Amprobe ACD-50NAV ACD-51NAV ACDC-52NAV ACD-53NAV ACD-54NAV Navigator-Clamps - Manual (Page 25)

19
Other Function :
AUTO/MANUAL Range
Select the “RANGE“ indicator, then press the navigator key to enter the
manual range mode. To return to the auto range mode, press the navigator
key for more than 2 seconds.
>2SEC
"Range"
"Range"
"ENTER"
"Range"
HOLD Key
Press HOLD key to freeze display value.
Press
Hold key
SMART HOLD: The meter will beep continuously and the display will flash if
the measured signal is larger than the display reading. (for V.A.W function)