Amprobe ACD-50NAV ACD-51NAV ACDC-52NAV ACD-53NAV ACD-54NAV Navigator-Clamps - Manual (Page 7)

1
SYMBOLS
X
Caution ! Risk of electric
shock
�
Caution ! Refer to the
explanation in this Manual
,
Application around and
removal from hazardous live
conductors is permitted.
T
Equipment protected
by double or reinforced
insulation
B Alternating Current (AC). F Direct Current (DC).
Temperature Measurement e Resistance Measurement
E Capacitance Measurement G Diode Measurement
R Continuity Beeper J Earth (Ground)
Y
To alert you to the presence
of a potentially hazardous
voltage, when the Meter
detects a voltage ≧30 V or a
voltage overload (OL) in V.
This symbol is displayed.
�
Complies with European
Directives
�
Conform to relevant
Australian standards
Battery
=
Do not dispose of this product as unsorted municipal waste. Contact
a qualified recycler
Safety Information
• This manual contains information and warnings that must be
followed for operating the instrument safely and maintaining the
instrument in a safe operating condition. If the instrument is used in
a manner not specified by the manufacturer, the protection provided
by the instrument may be impaired.
• The meter is intended only for indoor use.
• The meter protection rating, against the users, is double insulation
per IEC 61010-1 2nd Ed., EN 61010-1 2nd Ed., Category III 1000 Volts
AC & DC and Category IV 600 Volts AC & DC.
• Disconnect the test leads from the test points before changing the
position of the function rotary switch.
• Never connect a source of voltage with the function rotary switch in
e , E , , μA, position.
• Do not expose Meter to extremes in temperature or high humidity.
• Never set the meter in e , E , , μA, function to measure the voltage
of a power supply circuit in equipment that could result in damage
the meter and the equipment under test.