Amprobe ACD-50NAV ACD-51NAV ACDC-52NAV ACD-53NAV ACD-54NAV Navigator-Clamps - Manual (Page 17)

11
Individual Harmonic Measurement (AC mode only)
Select the “ “ indicator then press the navigator key to enter the
individual harmonic mode. To quit from the individual harmonic mode,
press the navigator key for more than 2 seconds.
Hn=RMS of Individual Harmonic ÷ RMS of fundamental ×100%.
"RIGHTWARD"
" "
"LEFTWARD"
"DOWNWARD"
"UPWARD"
" "
"LEFTWARD"
"RIGHTWARD"
"DOWNWARD"
"UPWARD"
ENTER
>2SEC
LPF (AC mode only)
Select the “LPF” indicator then press the navigator key to eliminate high
frequency noise
"LPF"
ENTER
Note : Peak Hold, Inrush, THD, HZ, individual Harmonic and LPF mode are
only available in AC mode.