Amprobe BAT-500 Battery-Impedance-Tester User Manual
Page 19
Advertising
12
9 to 25 pins Wiring Diagram
If 9 pins COM port is occupied, the 9
to 25 pins connector will be needed.
RS-232 Default Settings
When RS-232 communication
enabled ,the default RS-232
settings are
Baud Rate:
9600
Parity:
None
Data bits:
8
Stop bit:
1
RS-232 INTERFACE, SOFTWARE INSTALLATION AND OPERATION
RS-232 Wiring Diagram
Meter Side
Computer Side(Female)
RS-232 Connector Diagram
PIN 2 RX
PIN 3 TX
PIN 4 DTR
PIN 5 GND
PIN 7 RTS
PIN 6 DSR
PIN 8 CTS
Advertising