Eyboard – Amprobe MEGATEST-5000 Megohmmeter User Manual
Page 13
Advertising
4.3 Keyboard
Legend:
1. Decrease key
This modifies the voltage or time setting.
This displays the locations of the measurement models.
2. Increase key
This displays the saved performed measurements.
}
3. Confirmation or end of current operation.
4. Choosing the mode (MAN / AUTO / TIMER / PROGR) or deletion procedure.
5. Recalling stored measurements.
6. Saving the measurement parameters, the measurements that were performed and
printing out the measurements in the memory (from the displayed number to the last
one).
7. Starting up or stopping the measurement.
8. Turning the instrument on after automatic turn-off.
-11-
Advertising