Detailed specifications, Maintenance – Amprobe IR-712 IR-720 IR-730 Infrared-Thermometers User Manual

Page 16

Advertising
background image

12

DETAILED SPECIFICATIONS

Feature

IR-712 / IR-712-EUR

IR-720 / IR-720-EUR

IR-730 / IR-730-EUR

Temperature Range

-18°C to 550°C (0°F to 1022°F)

-32°C to 1050°C (-26°F to 1922°F)

-32°C to 1250°C (-26°F to 2282°F)

Accuracy (Assumes
ambient operating
temperature of 21°C to
25°C (70°F to 77°F)

±1.8% or ±1.8°C (±4F),
whichever is greater (Typical)

>0°C to 1250°C (>32°F to 2282°F): ±1.8% or ±1.8°C (±4F), whichever is
greater (Typical)
-32°C to 0°C (-26°F to 32°F): ±1.8%+1°C (2°F) or ±2.8°C (±6F),
whichever is greater (Typical)

Repeatability

±0.5% of reading or ±0.5°C (±1°F), whichever is greater (Typical)

Display Resolution

0.1°C / 0.1°F

Spectral Response

8µm to14µm

Laser Sighting

Single point laser

Laser Power

Output > 1mW Class 2, wavelength 630 to 670nm

Response Time (95%)

250ms

Distance to Spot (D:S)

12:1

20:1

30:1

Minimum Spot Size

25mm

25mm

24mm

Emissivity

Digitally adjustable from 0.10 to 1.00 by 0.01. Pre-set emissivity is 0.95

Ambient Operating
Temperature

0°C to 50°C / 32°F to 120°F

Relative Humidity

0% to 75% non-condensing

Storage Temperature

-20°C to 65°C / -4°F to 150°F (Battery not installed)

Temperature Display

°C or °F selectable

Display Hold

8 seconds

MAX/MIN Temperature
Display

DIF/AVG Temperature
Display

Dual LCD Display

LCD Backlit

Low Battery Indication

Tripod mount

Power

9V 6F22 alkaline battery or equivalent

Battery Life

10 hours with laser and backlight on
30 hours with laser and backlight off

Dimension (H x L x W)

Approximately 169 x 138 x 53 mm (6.7 x 5.4 x 2.1 in)

Weight

Approximately 290 g (0.64 lb) with battery installed

MAINTENANCE

Lens Cleaning: Blow off loose particles using clean compressed air. Gently brush remaining debris away with a camel
hair brush. Carefully wipe the surface with a moist cotton swab. The swab may be moistened with water or rubbing
alcohol.
NOTE: DO NOT use solvents to clean the plastic lens.
Case Cleaning: Use soap and water on a damp sponge or soft cloth.

Advertising