Amprobe IR-712 IR-720 IR-730 Infrared-Thermometers - Manual (Page 9)

5
Rotary Switch Positions
Button Description
MODE
Press MODE button to toggle between MAX, MIN, DIF, and AVG options.
When the thermometer goes into sleep mode, press MODE to turn the thermometer ON
again and it displays the last measurement result.
SET
Press to enter set-up mode stepping through Emissivity, Trigger Lock and Switching °C/°F
set-up. Details refer to the below Emissivity, Trigger Lock and °C / °F set-up.
/
Press
to turn the display backlight ON or OFF.
When the thermometer enters the setup up mode, press to select a set-up option
(Emissivity, Trigger lock, Switching °C / °F).
/
Press to turn the laser light ON or OFF.
When the thermometer enters the setup up mode, press to select a set-up option
(Emissivity, Trigger lock, Switching °C / °F).
Emissivity set-up
1. Press SET button to select Emissivity set-up, icon is blinking on the display
2. Press to increase the value by 0.01. Press and hold for quick setting. The maximum value is 1.00.
3. Press to decrease the value by 0.01. Press and hold for quick setting. The minimum value is 0.01.
4. Press MODE button to complete the setting and exit Emissivity set-up, or press SET button to complete the setting
and continue setting for Trigger Lock.
Note: Default emissivity is 0.95.