Amprobe ACD-45PQ Power-Quality-Clamp User Manual
Page 19
Advertising
13
• Then clamp the jaws around “Line 3” as reminded by annunciators “
L3”, and connect Black test probe (COM terminal) to “Line n (neutral)”
and Red test probe (+ terminal) to “Line 3” as reminded by annunciators
“
” on mini-display.
• When the reading is stable, press “
” button momentarily to enter the
third measuring value. The meter will then calculate, store and display
the total 3-Phase Power result automatically. Annunciators “ L1 L2 L3”
turn on.
• Press “
” button momentarily again for new measurements.
• Press “SELECT” button momentarily to view (“
”) the last stored
result. Annunciator “
” turns on & flashes. Press “SELECT” button
momentarily again to continue (“
”).
Advertising