Rrecord mode (cont’d.) – Amprobe DMII-PRO Data-Logger-Recorder User Manual
Page 19
R
Record Mode (cont’d.)
Step 4 - Start, Stop Recording - Press the
START
button. This will take you to the confirmation
screen.
• If you press the
START
button again you will start a recording session.
WARNING: All previously stored data in the memory will be erased. If you want to
cancel and return to the RECORD selection screen, press NO (middle right black button).
Previously recorded data will remain in the memory.
• To start a recording session, press
START
. Remember, all previously recorded data
will be lost.
• To terminate the recording session, press
STOP
button.
NOTE: YOU WILL TERMINATE THE RECORDING SESSION BY PRESSING
ON/OFF BUTTON.
At this stage you can view data being recorded by pressing view button. Please refer to the
next section on Page 21.
Page 19