Amprobe DMII-PRO Data-Logger-Recorder - Manual (Page 9)

R Language Set-up
R Clock Set-up
To change a language:
Step 1 - In the SET-UP screen, using arrow keys select a lang and press ENTER
Step 2 - Select your desired language.
Step 3 - Press ENTER .
If you are satisfied with the choice of language on your screen, skip this section.
Page 9
Step 1 - Under SET-UP screen, using arrows on the keypad, select clock, then press ENTER .
Step 2 - If clock needs to be changed, using arrow keys, change time and date.
Step 3 - Once correct information has been obtained, press OK to return to SET-UP screen.