PLANET FNSW-1600S - Manual (Page 10)

PLANET NOVASwitch series 10
OFF 10M Remains off and Link ON to
indicate the port runs in 10Mbps
Table B: FNSW-1600S Port-LED Functions
2.3 The Rear Panel
Figure 2: Rear View of FNSW-1600S
2.3.1 Extension Slot
The Switch port #16 can be a 100Base-FX switching port as the
extension module installed. As the module installed, the port#16 on
the front panel will be disabled.
Please refer to the Installation Guide of the module for the detailed
installation and settings.
NOTE: While powering on, The Switch detects the DIP-
switch status of the module, then shown on the
front panel LED indicators
2.3.2 Power Connector
The Power Connector is designed to be used with the power
cord included in the product package. Attach the female end of
the cord to the power connector and the male end of the cord to
a grounded power outlet. The accepted power range is from
100VAC to 240VAC, 50/60Hz.
2.3.3 Fan
All computing and communications devices work best when not
overheated. Please keep the fan area clear so that the cooling
function is not impaired.