PLANET VC-810S - Manual (Page 15)

User’s Manual of VC-810S / VC-810S48
15
Figure 2-6 Attach brackets to the VDSL2 Switch
You must use the screws supplied with the mounting brackets. Damage caused to the parts
by using incorrect screws would invalidate the warranty.
Step3: Secure the brackets tightly.
Step4: Follow the same steps to attach the second bracket to the opposite side.
Step5: After the brackets are attached to the VDSL2 Switch, use suitable screws to securely attach the brackets to the
rack, as shown in Figure 2-7 .
Figure 2-7 Mounting the VDSL2 Switch in a Rack
Step6: Proceeds with the steps 4 and steps 5 of session 2.2.1 Desktop Installation to connect the network cabling and
supply power to the VDSL2 Switch.