3 management methods, 1 web management, 2 login the switch – PLANET VC-810S User Manual
Page 22: Anagement, Ethods
User’s Manual of VC-810S / VC-810S48
22
3. 3 Management Methods
The
way to manage the VDSL2 Switch:
- Web Management via a network or dial-up connection.
3.3.1 Web Management
The PLANET VDSL2 Switch provides a built-in browser interface. You can manage the VDSL2 Switch remotely by having
a remote host with web browser, such as Microsoft Internet Explorer, Netscape Navigator or Mozilla Firefox.
Using this management method:
The VDSL2 Switch must have an Internet Protocol (IP) address accessible for the remote host.
Figure 3-1 Web Management over Ethernet
3.3.2 Login the Switch
The following shows how to startup the Web Management of the VDSL2 Switch, please note the VDSL2 Switch is
configured through an Ethernet connection, make sure the manager PC must be set on the same IP subnet address.
For example, the default IP address of the VDSL2 Switch is 192.168.0.100, then the manager PC should be set at
192.168.0.x (where x is a number between 1 and 254, except 100), and the default subnet mask is 255.255.255.0.
1
Use Internet Explorer 6.0 or above Web browser, enter IP address http://192.168.0.100 (the factory-default IP
address) to access the Web interface.
2
When the following login screen appears, please enter the default account and password - "admin" and press Apply
to enter the main screen. The login screen in
Figure 3-2
appears.
Default IP Address: 192.168.0.100
Default Account: admin
Default Password: admin