Recovering back to default configuration – PLANET WGSW-48040HP User Manual
Page 14
Advertising
14
8. Recovering Back to Default Configuration
IP Address has been changed or admin password has been
forgotten –
To reset the IP address to the default IP Address “192.168.0.100” or reset the
login password to default value, press the hardware reset button on the front
panel for about 10 seconds. After the device is rebooted, you can login the
management WEB interface within the same subnet of 192.168.0.xx.
RESET
FAN Alarm 2
FAN Alarm 1
SYS
PWR
48
46
47
45
48
Fiber
47
46
45
48
47
Figure 8-1: WGSW-48040HP Reset Button
Advertising