PLANET WGSW-48040HP - Manual (Page 5)

5
3. Terminal Setup
To configure the system, connect a serial cable to a COM port on a PC or notebook
computer and to RJ-45 type of serial (console) port of the Managed Switch.
PC / Workstation with
Terminal Emulation Software
RJ-45 Type Serial Port
115200,N,8,1
RJ-45 DB9 RS-232 Cable
Managed Switch
Serial Port
Console
115200,N,8,1
Figure 3-1 Managed Switch Console Connectivity
A terminal program is required to make the software connection to the Managed
Switch. Windows’ Hyper Terminal program may be a good choice. The Hyper
Terminal can be accessed from the Start menu.
1. Click START, then Programs, Accessories and then Hyper Terminal.
2. When the following screen appears, make sure that the COM port should be
configured as:
 Baud : 115200
 Data bits : 8
 Parity : None
 Stop bits : 1
 Flow control : None
Figure 3-2 Hyper Terminal COM Port Configuration