PLANET WGSW-48040HP User Manual
Page 8
Advertising
8
Configuring IP Address
3. At the “#” prompt, enter the following command and press <Enter> as shown
in Figure 5-2.
# configure terminal
(config)# interface vlan 1
(config-if-vlan)# ip address 192.168.1.100 255.255.255.0
The previous command would apply the following settings for the Managed Switch.
IP Address: 192.168.1.100
Subnet Mask: 255.255.255.0
Figure 5-2: Configuring IP Address Screen
4. Repeat step 1 to check if the IP address is changed.
Advertising