PLANET WGSW-52040 - Manual (Page 10)

10
 Show the current IP address
1. On “WGSW-52040#” prompt, enter “show ip interface brief”.
2. The screen displays the current IP address, Subnet Mask and Gateway as shown
in Figure 6-2.
Figure 6-2 Showing IP information Screen
If the IP is successfully configured, the Managed Switch will apply the new IP
address setting immediately. You can access the Web interface of Managed Switch
through the new IP address.
Note
If you are not familiar with console command or the related param-
eter, enter “help” anytime in console to get the help description.