Saving the configuration – PLANET WGSW-52040 User Manual
Page 13
Advertising
13
8. Saving the Configuration
In Managed Switch, the running configuration file stores in the RAM. In the
current version, the running configuration sequence running-config can be saved
from the RAM to FLASH by write command or copy running-config startup-
config command, so that the running configuration sequence becomes the start up
configuration file, which is called configuration save.
WGSW-52040> enable
WGSW-52040# copy running-config startup-config
Figure 8-1 Copying Running-config Startup-config Screen
Advertising