PLANET XGS3-24040 - Manual (Page 13)

1
9. Save the Configuration
In switch, the running configuration file stores in the RAM. In the current version,
the running configuration sequence running-config can be saved from the RAM to
FLASH by write command or copy running-config startup-config command, so
that the running configuration sequence becomes the start up configuration file,
which is called configuration save.
XGS3-24040> enable
XGS3-24040# copy running-config startup-config
Confirm to overwrite current startup-config configuration [Y/N]:Y
Write running-config to current startup-config successful
Figure 9-1 Copy running-config startup-config screen