PLANET POE-1200 - Manual (Page 21)

18
4.3.2 IP Configuration
This section provides DHCP Client, change the IP Address, Subnet Mask, Gateway and Description, the screen in Figure
4-5 appears.
Figure 4-5 IP Configuration screen
The page includes the following configurable data:
Object Description
DHCP Client Choose what the PoE Injector Hub should do following power-up: transmit a DHCP request, or
manual setting (Disable).
The DHCP client function only works if you haven't assigned a static IP address that different
than the PoE Injector Hub default IP. Once the default IP has been changed the DHCP will not
effective and the PoE Injector Hub will continue using the manually entered static IP. If you have
changed thePoE Injector Hub to a static IP address, you can set the IP address back to its
default IP address or you can reset the PoE Injector Hub back to factory default. And then you
can enable the DHCP client function to work.
The factory default is Disable.
IP Address The IP address of the PoE Injector Hub.. The factory default value is 192.168.0.100.
Subnet Mask The IP subnet mask of the PoE Injector Hub.. The factory default value is 255.255.255.0.
Gateway The default gateway of the PoE Injector Hub.. The factory default value is 192.168.0.254.
Description This field helps to identify the description of PoE Injector Hub.