PLANET POE-1200 - Manual (Page 4)

1
1. INTRODUCTION
1.1 Package Contents
Check the contents of your package for following parts:
●
The PoE Injector Hub x 1
●
The Quick Installation Guide x 1
●
User’s manual CD x 1
●
Power Cord x 1
●
Rubber feet x 4
●
Two rack-mounting brackets with attachment screws x1
If any of these are missing or damaged, please contact your dealer immediately, if possible, retain the carton including the
original packing material, and use them against to repack the product in case there is a need to return it to us for repair.
In the following section, the term “PoE Injector Hub” means the four PoE Injector Hub devices, ie. POE-1200,
POE-1200P2, POE-2400, POE-2400P4. Terms with lower case “injector” means any IEEE 802.3af power injectors. “PD”
means the abbreviated from IEEE 802.3af powered device.
1.2 Product Description
The PLANET POE-1200 / POE-1200P2 / POE-2400 / POE-2400P4 are 12 / 24-Port IEEE 802.3af Power over Ethernet
Mid-Span injector hub complies with IEEE 802.3, IEEE 802.3u and IEEE 802.3af standards. It is equipped with 12 / 24
10/100Base-TX Fast Ethernet ports that support full 48VDC power for any remote IEEE802.3af powered device (PD) like
Wireless LAN Access Point, IP phone, LAN Camera or any other network devices. With support for 130 / 260 watts power
supply, POE-1200 / POE-2400 should provide the sufficient power to the 12 / 24 remote devices. The POE-1200P2 /
POE-2400P4 provide sufficient 15.4 watts POE power to 12 / 24 remote PD devices with 190 / 380 watts power supply.
The PoE Injector Hub is installed between a regular Ethernet switch and the powered devices, injecting power without
affecting the data transmit. It offer a cost effective solution and quickly way to upgrade network system to IEEE 802.3af
Power over Ethernet, without replace the existing Ethernet switch.
There are 24 / 48 RJ-45 STP ports on the front panel of PoE Injector Hub, 12 / 24 of them on lower stack are "Date" port
and the other 12 / 24 ports on upper stack are "Data + Power output" port. Each of the "Data + Power output" port on
upper stack functions as an injector which inserts DC Voltage into the CAT 5 cable allowing the cable between the Injector
and Splitter to transfer data and power simultaneously.
To manage your powered devices, the PoE Injector Hub provides both Web management interfaces in which administrators
can manage functions such as port Enable/Disable, port priority, system configuration, and Username/Password changing
and with smart feature for powered device, the Hub can auto detect the power status on each port and show massages Web
management interface. These features also provide a cost-effective way to manage the devices from Internet whenever
you are at work or at home.
Power over Ethernet Applications
For the places hard to find the power outlet, the PoE Injector Hub provides the easiest way to power your Ethernet devices
such as PLANET Internet Cameras and outdoor Wireless Access Point installed on the top of the building.
To control the power system of your networking devices, the PoE Injector Hub can directly co-work with PoE IP Phone to
build VoIP telephony network in the office. Furthermore, the PoE Injector Hub can be directly connected to any third party
802.3af devices and PoE Switches installed 100 meters away.