PLANET VIP-156PE - Manual (Page 14)

14
Client
#112xxx*xxx*xxx*
xxx#
Setup Static IP Address
Use the * (star) key
when entering a decimal
point.
DHCP will be disabled and
system will change to the
Static IP type.
#113xxx*xxx*xxx*
xxx#
Set Network Mask
Use the * (star) key
when entering a decimal
point.
Must set Static IP first.
#114xxx*xxx*xxx*
xxx#
Set Gateway IP Address
Use the * (star) key
when entering a decimal
point.
Must set Static IP first.
#115xxx*xxx*xxx*
xxx#
Set Primary DNS Server
Use the * (star) key
when entering a decimal
point.
Must set Static IP first.
#190# Unlock None
Must unlock the protect
function before set up
network settings and ATA
function via keypad.
#191# Lock None
The system will be lock
and can’t set up network
settings via keypad.
#195#
Reboot None
The system will reboot
automatically.
#198#
Factory Reset None
The system will be reset to
factory default value and
reboot automatically.
0＊
To switch PSTN mode None VIP-157 only
Following keypad commands can be used to display the network settings enabled on ATA via voice
prompt.
IVR Menu Choice Machine operation Notes:
#120# Check PC IP Address
IVR will announce the current PC-port IP
address of the ATA.
#121# Check network connection Type
IVR will announce if DHCP in enabled or
disabled.
#122# Check the Phone Number
IVR will announce current enabled VoIP
number.
#123# Check Network Mask
IVR will announce the current network mask
of the ATA.
#124# Check Gateway IP Address IVR will announce the current gateway IP