PLANET IGT-1205AT - Manual (Page 18)

18
3.2 Mounting Installation
This section describes how to install the Industrial Gigabit Media
Converter and makes connections to it. Please read the following topics
and perform the procedures in the order being presented.
Note
In the installation steps below, this Manual uses
IGS-801 (PLANET 8-port Industrial Gigabit Switch) as
the example. However, the steps for PLANET Industrial
Switch and Industrial Media Converter are similar.
3.2.1 DIN-rail Mounting
The DIN-rail is screwed on the Industrial Gigabit Media Converter
when is out of factory. When replacing the wall-mount application with
DIN-rail application on Industrial Gigabit Media Converter, please refer
to the following figures to screw the DIN-rail on the Industrial Gigabit
Media Converter. To hang the Industrial Gigabit Media Converter, follow
the following steps:
Step 1: Screw the DIN-rail on the Industrial Gigabit Media Converter.