6 redundancy overview (igt-1205at only) – PLANET IGT-1205AT User Manual
Page 27
27
3.6 Redundancy Overview (IGT-1205AT only)
The IGT-1205AT provides rapid fiber redundancy of link for highly
critical Ethernet applications. The redundant-mode supports auto-
recover function. If the destination port of a packet is link down, it will
forward the packet to the other port of the backup pair. The following
figure shows the redundant function.
Main
Primary
Backup
Redundancy
< Primary Port >
Link Status :
Up
Traffic Flow :
Forwarding
< Backup Port >
Link Status :
Down
Traffic Flow :
Blocking
Main
Primary
Backup
Redundancy
< Primary Port >
Link Status :
Down
Traffic Flow
:
N/A
< Backup Port >
Link Status :
Up
Traffic Flow :
Forwarding
Traffic is changed from Primary-Port to Backup-Port
Figure 3-3: Redundancy Behavior Topology
z
Link status auto detect and redundant on dual ports with the same
connector type.
z
Only when primary port is activated, the backup port is blocked.
z
When primary port link failure occurs, the traffic will swap to backup
port automatically.
z
Once the primary port status is back to link up, the traffic will swap
from backup port to primary port.