PLANET VF-10x-KIT - Manual (Page 12)

12
2.1.1 Ports connection
Video Connection
Connecting the video signal to or from the
product through a 75Ω coax cable with
BNC plug.
Async-data
Connection
n Connect the output data port (eg. TX+
and TX-) of other control device to the
RX+ and RX- of the RX
n Connect the input data port (eg. RX+
and RX-) of other under controlled
device to the TX+ and TX- of the TX.
n GND in both TX and RX should be
connected directly to user’s equipment
Fiber Connection
Connect the fiber-optic cable pigtail (with
FC/PC, SC/PC, WDM/PC or ST/PC optical
connector) to the product’s Fiber port.
2.1.2 LED Indicators
The rich diagnostic LEDs on the front panel can provide the
operating status of individual port and whole system. There are
“POWER”, ”VIDEO”, ”LINK” 3 LEDs in the front panel of TX/RX.
Each LED lightens means:
LED Color Function
POWER Green
Lights to indicate that the Converter has
power.
VIDEO Green Lighted when video signal in.
LNK Green Lighted when laser in.