PLANET VF-10x-KIT - Manual (Page 15)

15
Step 3: Attach FC single mode fiber cable from the VF-10x-T
to VF-10x-R in the remote side.
Step 4: VF-10x-R (Receiver): Connect coaxial cable from
monitor / DVR to Video BNC port of the VF-10x-R.
Step 5: Connect the 5V DC power adapter to the VF-10x-T /
VF-10x-R and verify that the Power LED lights up.
Step 6: Turn on the power of the analog camera / monitor;
the VIDEO LED (Green) should light when all cables
are attached.
Coax
Video
Speed Dome
DVR / Monitor
Control Keyboard
Fiber-optic
Serial Line (RS-485) |O|O|
|O|O|
|O|O|
Up to 20km
Coax
VF-10X-T
Transmitter
VF-10X-R
Receiver
Video Line Video
Video
Figure 3-1 VF-10x-T / VF-10x-R stand alone installation