PLANET VF-10x-KIT - Manual (Page 18)

1
3.4 Optional - DIN-Rail mounting
There are two DIN-Rail holes on the left side of the VF-10x-T/
VF-10x-R that allows the converter can be easily installed with
DIN-Rail mounting. The PLANET optional DIN-Rail mounting Kit
– RKE-DIN can be order separately. When need to replace the
wall mount application with DIN-Rail application on the VF-10x-T
/ VF-10x-R, please refer to following figures to screw the DIN-
Rail on the converter. To hang the VF-10x-T / VF-10x-R, follow
the below steps:
Step 1: screw the DIN-Rail on the VF-10x-T / VF-10x-R.
Step 2: Lightly press push the DIN-Rail into the track.