PLANET WFT-801 - Manual (Page 10)

8
Chapter 7
MANAGE MEDIA CONVERTER
The Intelligent Media Coverter Chassis that can control this Smart
Media Converter through the management system, this Smart
Media Converter can be controlled through Web Browser, SNMP
management utility and terminal emulation program.
The Intelligent Chassis will detect the setting on the DIP switches
and display out the status, also the Management Chassis can
control the function through the maanagement system.
Through the Intelligent Media Converter
Chassis System, you can control the
setting of this Smart Media Converter,
to set the Fiber and UTP (FDX/HDX),
UTP (Auto-negotiation/Manual), Speed
(10M/100M), LLR Enable/Disable), LLCF
(Enable/Disable)
Device
Link
Setup
To enable or disable the connection of both
UTP port and Fiber port
LLCF
Setup To enable or disable the LLCF function of the
device
M1 AN
Setup To set the UTP to Auto-negotiation or Forced
Mode
M1
Speed
Setup
To set the speed of UTP to 10M or 100M
M1 DUP
Setup To set the Duplex Mode of UTP port to Full
or Half
M1 FC
Setup To set the Flow Control of the UTP to enable
or disable
EM_WFT8v2.indd 2004/11/5, �� 11:32 8