Chapter 2 product features – PLANET WFT-801 User Manual
Page 4
2
Chapter 2
PRODUCT FEATURES
=
One-channel media conversion between 10/100TX and
100FX
=
Fiber media allows: multi-mode fiber using ST, SC, LC or
MT-RJ connector; single-mode fiber using SC or single
SC WDM connector
=
Auto-negotiation of speed and duplex mode on 10/100TX
port
=
Supports Link Pass Through
=
Supports Auto-MDI/MDIX for 100TX port
=
DIP switch for configuring fixed half/full duplex modes
=
DIP switch for setting to Forced mode or Auto-negotia-
tion
=
DIP switch for setting the speed
=
DIP switch for setting the LLCF, LLR function
=
Store-and-forward mechanism
=
Back-pressure & IEEE802.3x compliant flow control
=
Full wire-speed forwarding rate
=
Front panel status LEDs
=
Used as a stand-alone device or with a chassis
=
Hot-swappable when used with a Chassis System
=
Manageable through Intelligent Chassis System
EM_WFT8v2.indd
2004/11/5, �� 11:32
2