PLANET WFT-801 - Manual (Page 7)

5
Chapter 5
DIP SWITCH
There is a DIP switch for the setting on copper and fiber port.
Refer to the table below for more details.
Switch 1
On Fiber Half Duplex
Off Fiber Full Duplex (default)
Switch 2
On TX Forced Mode
Off TX Auto-Negotiation(default)
Switch 3
On TX 10M
Off TX 100M (default)
Switch 4
On TX Half Duplex
Off TX Full Duplex (default)
Switch 5
On LLR Enable
Off LLR Disable (default)
Switch 6
On LLCF Enable
Off LLCF Disable (default)
EM_WFT8v2.indd 2004/11/5, �� 11:32 5