PLANET ICA-HM830W - Manual (Page 12)

12
Step 1. Prepare a PC with Ethernet link to the network
Step 2. Connect an Ethernet cable
Connect LAN port (RJ-45) of the IP Camera to a network switch.
Step 3. Attach the power supply
Plug in power adapter to IP Camera and connect another end to power
outlet.
Note
Only use the power adapter supplied with IP Camera otherwise, the
product may be damaged.
Step 4. Plug Power on 100V ~ 240V
Ensure the power adaptor specification matches the power system (100 ~
110V AC or 220 ~ 240V AC) and connect the adaptor to the outlet.
Step 5. Check LED status
The Power LED is defined to identify IP Camera status. When IP Camera
booting the LED will be flashing and while IP Camera is ready the LED will
be green.
Step 6. Adjust lens focus
Clockwise or counter-clockwise rotation the IP Camera lens for adjust
focus.
2.2.4 Wall/Ceiling Mount Installation Procedure
Step 1. Take the wall mount bracket, put it on the target place and fix it with the
supplied screws (total of 2).