PLANET WNL-9310 User Manual
Page 19
PLANET WNL-9310 User Manual
Display PC to
PC (Ad-Hoc)
Select this check box to display ad-hoc (computer-to-computer) networks.
Display 802.11b
Access Point
Select this check box to display 802.11b (infrastructure) network.
Display 802.11a
Access Point
Select this check box to display 802.11a (infrastructure) network. This
function is disable now.
Display 802.11g
Access Point
Select this check box to display 802.11g (infrastructure) network.
Network Name
Available wireless networks are listed.
MAC Address
This is the MAC address of the Access Point (or Wireless station, if the
network is an Ad-hoc network).
Security
Data encryption and authentication methods used on the wireless network
CH.
The channel used by the Wireless network.
Signal
This is displayed as percentage (0~100%)
Frequency
The Wireless band used by this Wireless network.
Network Type
This will indicate “Infrastructure” (displayed device is an Access Point) or
“Ad-hoc”. (displayed device is a Wireless station)
Rescan
Click this button to rescan for all Wireless networks.
Connect
Click the desired network to which you want to connect, and then click
connect
16