PLANET WPG-130N - Manual (Page 45)

PLANET 802.11n Wireless Presentation Gateway
WPG-130N
- - 45
5.3.7 Firmware Upgrade
This page allows you upgrade the WPG-130N firmware to new version. Please note, do not power off the
device during the upload because it may crash the system.
Figure 4-12
If it is necessary to upgrade the firmware, please follow the steps below to operate carefully.
Step 1. First, download the latest firmware image file from PLANET official website.
Step 2. Click Browse button to specify the file you want to upgrade.
Step 3. Click Upgrade button to start.
Step 4. There will be a warning message shown and count down counter on the screen.
Step 5. After a few minutes, a complete message shown on the screen.
Step 6. Power off the WPG-130N, then power on it again.
Step 7. Login the web UI, and click Reset to Default to take effect.
When you upgrade its firmware, you may lose its current configurations. Do not turn off the
WPG-130N while the firmware is being upgraded, otherwise, the WPG-130N may be damaged.