PLANET WPG-130N - Manual (Page 47)

PLANET 802.11n Wireless Presentation Gateway
WPG-130N
- - 47
Appendix A: Configuring the PCs
In this section, we’ll introduce how to install and configure the TCP/IP correctly in Windows XP. First make
sure your Ethernet Adapter is working, refer to the adapter’s manual if needed.
1. Install TCP/IP component
1) On the Windows taskbar, click the Start button, point to Settings, and then click Control Panel.
2) Click the Network and Internet Connections icon, and then click on the Network Connections
tab in the appearing window.
3) Right click the icon shown below, select Properties on the prompt page.
Figure A-1
4) In the prompt page shown below, double click on the Internet Protocol (TCP/IP).