PLANET ICA-HM120 User Manual
Page 30
29
5. In
IP address field, please fill in any IP address begins with 192.168.0, and ends with a value
greater than 2 and less than 254 (You can use the following example 192.168.0.239). In
Subnet mask field, please fill 255.255.255.0. Please keep all other fields empty, and click OK.
If you changed the IP address of this PT internet camera and you forget it, there’re 2 methods to
recover it:
a. Press and hold the Reset button located at the bottom of this IP camera, to clear all
settings of the IP camera and reset the IP address back to 192.168.0.20. You’ll lose all
settings in the IP camera.
b. Ask network administrator to check the DHCP release table, if the camera was set to
obtain the IP address by DHCP, a new record will be added to DHCP release table on
DHCP server when the IP camera is connected to the local area network.