PLANET IVS-H120 - Manual (Page 61)

3.11 E-Mail Configuration
You may setup SMTP mail parameters for further operation of Event Schedule. That’s, if users
want to send the alarm message out, it will need to configure parameters here and also add at
least one event schedule to enable event triggering.
SMTP Server: Type the SMTP server name or the IP address of the SMTP server.
Test: Send a test mail to mail server to check this account is available or
not.
SMTP Port: Set port number of SMTP service.
SMTP Authentication:
Select the authentication required when you send an e-mail.
Disable: If no authentication is required when an e-mail is send.
Enable: If authentication is required when an e-mail is sent.
Authentication User
Name: Type the user name for the SMTP server if Authentication is
Enabling.
Authentication
Password: Type the password for the SMTP server if Authentication is
Enabling.
E-mail From: Type the sender’s E-mail address. This address is used for reply
e-mails.
61