Load documents on the scanner glass – HP ScanJet Pro 4500 fn1 User Manual
Page 26
Advertising
2.
Load the pages with the face up and the top edge of the pages into the ADF input tray.
NOTE:
Do not tap the edge of the document stack or drop the paper stack into the ADF input tray.
Figure 3-3
Load same-sized pages in the ADF input tray
ScanJet Pr
o 4500 f1
3.
Adjust the paper guides to the width of the document.
NOTE:
Make sure not to push the paper guides so tightly as they bend the documents.
The documents are now ready to be scanned.
Load documents on the scanner glass
1.
Open scanner lid.
2.
Load the document on the scanner glass face down according to the indicators on the product.
3.
Close the scanner lid. The document is now ready to scan.
18
Chapter 3 Use the scanner
ENWW
Advertising