ProSoft Technology MVI69-ADM - Manual (Page 101)

MVI-ADM ♦ 'C' Programmable Programming the Module
'C' Programmable Application Development Module Developer's Guide
ProSoft Technology, Inc. Page 101 of 342
February 20, 2013
5.4 MVI System BIOS Setup
The BIOS Setup for the MVI products contains module configuration settings and
allows for placing the MVI-ADM module in a flash update mode. To access the
BIOS Setup, attach a null modem cable from the PC COM port to the
Status/Debug port on the MVI-ADM module. Start HyperTerm with the
appropriate communication settings for the Debug port. Press CTRL-C during the
memory test portion in the booting of the module.
It may be necessary to install the setup jumper in order to access the BIOS
Setup. The setup jumper will be necessary if the Console is disabled. When the
BIOS Setup is entered the following screen will appear:
To place the MVI-ADM module in a mode where it is waiting to receive a new
flash image, select Begin Flash ROM Update Mode.
Select MVI-ADM module Configuration to set the Console, Console Baud Rate
and Compact Flash mode. The Console allows keyboard entry and text output to
the debug port. The baud rate of the console port is selected by the Console
Baud Rate option. In order to use a Compact Flash disk in the MVI-ADM module
the Compact Flash option must be set to CHS mode.