ProSoft Technology MVI69-ADM - Manual (Page 126)

Application Development Function Library - ADM API MVI-ADM ♦ 'C' Programmable
Developer's Guide 'C' Programmable Application Development Module
Page 126 of 342 ProSoft Technology, Inc.
February 20, 2013
ADM_DAWriteSendCtl
Syntax
int ADM_DAWriteSendCtl(ADMHANDLE adm_handle, ADM_INTERFACE *adm_interface_ptr,
int app_port, int marker);
Parameters
adm_handle Handle returned by previous call to ADM_Open
adm_interface_ptr Pointer to ADM_INTERFACE structure which contains structure
pointers needed by the function
app_port Application serial port referenced
marker Flow control symbol to output to the data analyzer screen
Description
This function may be used to send a transmit flow control symbol to the data
analyzer screen. The control symbol will appear between two angle brackets:
<R+>, <R->, <CS>.
adm_handle must be a valid handle returned from ADM_Open.
Valid values for marker are:
RTSOFF <R->
RTSON <R+>
CTSRCV <CS>
MVI94 Note
Only application port 0 is valid for the MVI94.
Return Value
MVI_SUCCESS No errors were encountered
MVI_ERR_NOACCESS adm_handle does not have access
MVI_ERR_BADPARAM Value of marker is not valid
Example
ADMHANDLE adm_handle;
ADM_INTERFACE *interface_ptr;
ADM_INTERFACE interface;
interface_ptr = &interface;
ADM_DAWriteSendCtl(adm_handle, interface_ptr, app_port, RTSON);
See Also
ADM_DAWriteRecvCtl (page 127)