ProSoft Technology MVI71-MNET - Manual (Page 52)

MVI71-MNET ♦ PLC Platform Diagnostics and Troubleshooting
Modbus TCP/IP Interface Module User Manual
Page 52 of 109
ProSoft Technology, Inc.
June 23, 2009
4.1.6 Network Menu
The network menu allows you to send, receive, and view the WATTCP.CFG file
that contains the IP and gateway addresses, and other network information.
M = Main Menu
M = Main Menu
S = Send WATTCP.CFG
R = Receive WATTCP.CFG
? = Display Menu
@ = Network Menu
Return to Main Menu
Download WATTCP.CFG to PC
Upload WATTCP.CFG to module
Redisplays (refreshes) this menu
V = View WATTCP.CFG View WATTCP.CFG file on module
Transferring WATTCP.CFG to the module
Press [R] to transfer a new WATTCP.CFG file from the PC to the module. Use
this command to change the network configuration for the module (for example,
the module’s IP address).
Press [Y] to confirm the file transfer, and then follow the instructions on the
terminal screen to complete the file transfer process.
Transferring WATTCP.CFG to the PC
Press [S] to transfer the WATTCP.CFG file from the module to your PC.
Press [Y] to confirm the file transfer, and then follow the instructions on the
terminal screen to complete the file transfer process.
After the file has been successfully transferred, you can open and edit the file to
change the module’s network configuration.
Viewing the WATTCP.CFG file on the module
Press [V] to view the module’s WATTCP.CFG file. Use this command to confirm
the module’s current network settings.
Returning to the Main Menu
Press [M] to return to the Main Menu.