Nikon D7200 body User Manual

Page 150

Advertising
background image

126

6

Measure white balance.
Press

J or press the shutter-release

button all the way down to measure
white balance. The time available to
measure white balance is that
selected for Custom Setting c4
(Monitor off delay) > Live view
(

0 279).

If the camera is unable to measure
white balance, the message shown at
right will be displayed. Choose a new
white balance target and repeat the
process from Step 5.

7

Exit direct measurement mode.
Press the

L (U) button to exit direct measurement mode.

When Preset manual is selected for
White balance in either of the
shooting menus, the position of the
target used to measure preset manual
white balance will be displayed on
presets recorded during live view.

A

Measuring Preset Manual White Balance (Live View)

Preset manual white balance can not be measured when Record
movies
is selected for Custom Setting g4 (Assign shutter button,
0 288) and the live view selector is rotated to 1. Preset manual white
balance can not be set while an HDR exposure is in progress (

0 141).

Advertising