Nikon D7200 body User Manual
Page 199
175
A
Calculating the Length of the Final Movie
The total number of frames in the final
movie can be approximated by dividing the
shooting time by the interval and rounding
up. The length of the final movie can then
be calculated by dividing the number of
shots by the frame rate selected for Frame
size/frame rate in movie shooting menu
(
0 166, 273). A 48 frame movie recorded at
1920 × 1080; 24p, for example, will be
about two seconds long. The maximum
length for movies recorded using time-
lapse photography is 20 minutes.
A
During Shooting
During time-lapse photography, the
memory card access lamp will light and the
time-lapse recording indicator will be
displayed in the control panel. The time
remaining (in hours and minutes) appears in
the shutter-speed display immediately
before each frame is recorded. At other times, the time remaining can
be viewed by pressing the shutter-release button halfway. Regardless
of the option selected for Custom Setting c2 (Standby timer,
the standby timer will not expire during shooting.
To view current time-lapse photography
settings or end time-lapse photography,
press the
G button between shots.
Frame size/
frame rate
Memory card
indicator
Length recorded/
maximum length