Nikon D7200 body User Manual
Page 249
Advertising
225
The camera can store data for up to nine non-CPU lenses. To
enter or edit data for a non-CPU lens:
1
Select Non-CPU lens data.
Highlight Non-CPU lens data in the
setup menu and press
2.
2
Choose a lens number.
Highlight Lens number and press
4
or
2 to choose a lens number.
3
Enter the focal length and aperture.
Highlight Focal length (mm) or
Maximum aperture and press
4 or
2 to edit the highlighted item.
4
Save settings and exit.
Press
J. The specified focal length and aperture will be
stored under the chosen lens number.
A
Focal Length Not Listed
If the correct focal length is not listed, choose the closest value greater
than the actual focal length of the lens.
Advertising