Nikon D7200 body - Manual (Page 306)

282
e Bracketing/flash
e1 Flash sync speed (defaults to 1/250 s)
1/320 s (Auto FP) Choose a flash sync speed.
1/250 s (Auto FP)
1/250 s
1/200 s
1/160 s
1/125 s
1/100 s
1/80 s
1/60 s
A
Fixing Shutter Speed at the Flash Sync Speed Limit
To fix shutter speed at the sync speed limit in mode S or M, select the
next shutter speed after the slowest possible shutter speed (30 s or
%). An X (flash sync indicator) will be displayed in the viewfinder and
control panel.
A
Auto FP High-Speed Sync
Selecting an “Auto FP” option allows compatible flash units to be used
at the highest shutter speed supported by the camera (
0 314). Auto
FP high-speed sync is enabled automatically at shutter speeds faster
than the chosen flash sync speed (
1 /
320
s or 1 /
250
s depending on the
option selected), allowing wider apertures for reduced depth of field
even in daylight. If the shutter-speed displays in the control panel and
viewfinder show a value equal to the flash sync speed in modes P and
A
, auto FP high-speed sync will still be activated if the actual shutter
speed is even slightly faster.