Nikon D7200 body User Manual
Page 330
306
12 Can be used with AF-S and AF-I lenses only (
0 307). For information on the focus points
available for autofocus and electronic rangefinding, see page 307.
13 When focusing at minimum focus distance with AF 80–200mm f/2.8, AF 35–70mm f/2.8, AF
28–85mm f/3.5–4.5 <New>, or AF 28–85mm f/3.5–4.5 lens at maximum zoom, in-focus
indicator (
I) may be displayed when image on matte screen in viewfinder is not in focus.
Adjust focus manually until image in viewfinder is in focus.
14 With maximum aperture of f/5.6 or faster.
15 Some lenses can not be used (see page 308).
16 Range of rotation for AI 80–200mm f/2.8 ED tripod mount is limited by camera body. Filters
can not be exchanged while AI 200–400mm f/4 ED is mounted on camera.
17 If maximum aperture is specified using
Non-CPU lens data (
0 225), aperture value
will be displayed in viewfinder and control panel.
18 Can be used only if lens focal length and maximum aperture are specified using
Non-CPU
lens data (
0 225). Use spot or center-weighted metering if desired results are not
achieved.
19 For improved precision, specify lens focal length and maximum aperture using
Non-CPU
lens data (
0 225).
20 Can be used in mode M at shutter speeds slower than flash sync speed by one step or more.
21 Exposure determined by presetting lens aperture. In mode A, preset aperture using lens
aperture ring before performing AE lock and shifting lens. In mode M, preset aperture using
lens aperture ring and determine exposure before shifting lens.
22 Exposure compensation required when used with AI 28–85mm f/3.5–4.5, AI 35–105mm
f/3.5–4.5, AI 35–135mm f/3.5–4.5, or AF-S 80–200mm f/2.8D.
23 With maximum effective aperture of f/5.6 or faster.
24 Requires PK-12 or PK-13 auto extension ring. PB-6D may be required depending on camera
orientation.
25 Use preset aperture. In mode A, set aperture using focusing attachment before determining
exposure and taking photograph.
• PF-4 Reprocopy Outfit requires PA-4 Camera Holder.
• With some lenses, noise in the form of lines may appear during autofocus at high ISO
sensitivities. Use manual focus or focus lock.