Play back the image – Canon EOS 1300D User Manual

Page 243

Advertising
background image

243

Preparing to Print

6

Play back the image.

Press the <

x

> button.

The image will appear with the <w>
icon on the upper left of the screen to
indicate that the camera is connected
to a printer.

Before using the printer, make sure it has a PictBridge connection port.

Movies cannot be printed.

The camera cannot be used with printers compatible only with CP Direct
or Bubble Jet Direct.

Do not use any interface cable other than the one provided.

If there is a long beeping sound in step 5, it indicates a problem with the
printer. Resolve the problem displayed in the error message (p.250).

If [53: Wi-Fi/NFC] is set to [Enable], the camera cannot be connected to
a printer. Set [Wi-Fi/NFC] to [Disable], then reconnect the camera to a
printer with an interface cable.

You can also print RAW images taken with this camera.

When you use a battery to power the camera, make sure it is fully
charged. With a fully-charged battery, you can print for approx. 2 hr. 40
min.

Before disconnecting the cable, first turn off the camera and printer. Hold
the plug (not the cord) to pull out the cable.

For direct printing, using DC Coupler DR-E10 (sold separately) and
Compact Power Adapter CA-PS700 (sold separately) to power the
camera is recommended.

Advertising