Canon EOS 1300D - Manual (Page 292)

Troubleshooting Guide
292
 Under [53: Custom Functions (C.Fn)], set [3: Flash sync. speed in
Av mode] to [0: Auto] (p.261).
 The built-in flash’s pop-up mechanism moves slightly. This is normal
and not a malfunction.
 If you use flash, the shutter will make two sounds each time you shoot
(p.141).
 It indicates that the camera’s internal temperature is high. If the white
<s> icon is displayed, the still photo’s image quality may deteriorate.
If the red <E> icon is displayed, it indicates that the Live View
shooting will soon stop automatically (p.157).
 It indicates that the camera’s internal temperature is high. If the red
<E> icon is displayed, it indicates that the movie shooting will soon
stop automatically (p.181).
 If the card’s writing speed is slow, movie shooting may stop
automatically. Use an SD Speed Class 6 “
” or faster card. To
find out the card’s reading/writing speed, refer to the card
manufacturer’s website, etc.
 If a movie clip’s file size reaches 4 GB or the shooting length reaches
29 min. 59 sec., the movie shooting will stop automatically.
High-speed sync cannot be set in the <f> mode.
The camera makes a noise when it is shaken.
The shutter makes two shooting sounds during Live View shooting.
During Live View shooting, a white <s> or red
<E> icon is displayed.
During movie shooting, a red E icon is displayed.
Movie shooting stops by itself.